|
Prologue
In routine and living indoor environment, maybe there are
many contaminations that you are not aware of. But they harm
people’s health soundlessly. According to experts’ check
and measure, the familiar contaminations are bacterium, virus,
dust, pollen, odors, organic gas (such as benzene, toluene,
formaldehyde, trichloro-ethylene etc), inorganic gas (such as
ammonia, CO2, SO2, NO2 etc),
cooking lampblack and smoke etc. Once people suck the contaminated
air to a degree, they will have uncomfortable symptom such as
dizziness, fluster, cancer, immunity decline, etc. Some disease
such as the syndrome of office block, air conditioner syndrome,
new residence syndrome etc have got people’s attention. According
to the stat. of EPA in the USA, the concentration of indoor
air contaminations is 2–5 times higher than out door air,
sometimes even gets to 100 times. The air quality is worrying
especially in the hermetic room using air conditioner and central
heating. Civil residents spend 90% time in the room, which indicates
the influence of indoor air is more important than out door
air and is closely linked to our health.
Product
Introduction
The product adopts the most advanced new technology of environmental
protection in the world—take nanometer photocatalyst for
the core, combining with coupling technology of activated
oxygen and nanometer photocatalyst, activated carbon, HEPA
dust removing technology and negative ion refresher technology.
It has strong functions of removing dust, eliminating odors,
disinfection, sterilization, disposing harm gas etc to purify
the air. It has peculiar effect to ammonia, benzene, rheum
virus, acarid and formaldehyde
released by room fitments. The product is a kind of new
type air purifier; it has witty design, complete functions,
and high efficiency, and is easy to operate. The quality
of indoor air can be improved quickly and you will have
a feeling like bathing in the fresh nature.
The product has the characters of high efficiency, low noise,
and environmental protection. The design combines integer with
part, it assists with microcomputer telecontrol and can attach
the world tide. Our product is your best choice.
Thank you very much for your attention to our product. Please
read the specification carefully first before using it. Hence
you could know more about our products and operate it correctly.
Configuration
diagram
The charm lies on its fourfold completely
purifying function.
1.The product adopts newly typed filter screen
with antibacterial and mould proof functions can effectively
filter bigger granule dust of indoor air.
2.Using coarse filtration and alveolar activated
carbon, can eliminate smaller granule dust, odor and peculiar
smell. Adopting HEPA (high efficient air purifier) materials,
can purify suspended containment with granule diameter up
to 0.3µm and its purifying efficacy is up to more than 95%.
(To cigarette, smog, etc. granule diameter with above 0.5µm,
purifying efficacy can reach more than 99%). It can almost
remove all smog, pollen, dust, mildew spore, animal hair,
bacterium and soot.
3.Utilizing nano photocatalytic modules,
it can high efficiently decompose harmful gases. Under
the function of photocatalyst
adding unique active oxygen and photocatalyst
coupling technology, it can more efficiently realize
the aim of decomposing harmful contamination and disinfection,
sterilizing and deodorizing.
4.Negative ion air fresh technology can eliminate suspended
granules penetrated in the air and release inside “ air
vitamin”—— negative
ions to make you breath fresh and joyful air like in the forest
when you are indoor.
Work
Elements
Purifying flow chart
Instruction
for operation
1.Control panel chart show
2.Instruction of work mode
Fresh mode: Reach to highly efficiently eliminate
smog and remove dust, fresh function.
Purifying mode: Reach to highly efficiently
eliminate smog and remove dust, decompose harmful gases, deodorize,
fresh function.
Sterilizing mode: Reach to highly efficiently
eliminate smog and remove dust, disinfect and sterilize, decompose
harmful gases, deodorizing function.
Regenerating mode: Intensify or resume photocatalytic
function.
3.Selection of work mode
Fresh mode: When air is more clean, selecting
this mode can efficiently filter particulate in the air and
make indoor air contain abundantly with negative ions to reach
the aim of fresh and health protection.
Purifying mode: When air is grime (with odor,
peculiar smell or harmful gases), selecting this mode can
purify indoor air.
Sterilizing mode: When air is stronger odor
or need be disinfected or sterilized, selecting this mode
can be efficient.
Regenerating mode: After being used for a
period of time, photocatlyst needs to be regenerated to ensure
photocatalyst treat harmful gases under the best status. Suggested
1~4hours/2weeks.
4.Specific operating methods:
1). Plug in and power supply indicator light
on the panel will light. The machine electrifies and is in
the state of alert.
2). According to inside environment contaminated
degree customers can select corresponding work mode through
the following keys:
Fresh: Press the key and enter fresh work
mode.
Purifying: Press the key and enter purifying
work mode.
Sterilizing: Press the key and enter sterilizing
work mode.
Regenerating: Press the key one time and enter
fresh mode, for the second time is regenerating mode.
3). Timing and wind speed selection function
Timing: Press the key and work according to
the selected time.
Repeat pressing the key, definite time will
circulate according to the following sequence: 2~4~8hours——timing
cancel——2……, definite time will show on the panel
and when time is out the machine will be self-motion alert.
Wind speed: Under any mode, pressing this
key can all change circulating wind volume of this mode. Repeat
pressing this key and the machine will circulate according
to the sequence of “weak—middle—strong—weak”
4). Wait: When the machine is on any mode,
press the key of “Wait”and the machine will be on the
state of wait. Note: Timing key and wind speed key is efficient
only on the state of having selected work mode. Under the
mode of sterilizing, definite time only circularly selects
between 2, 4 and 8. After finishing it will automatically
enter fresh mode.
5.Remote operating methods:
1). Plug in. The machine electrifies, being
on the state of wait, and can use remoter control.
2). Key-press function: Key-press functions
of “Fresh”, “Purifying”, “Sterilizing”, “Regenerating”,
“Timing”, “Wind speed”and “Wait”on the remoter
control are corresponding with that of panel one by one.
Daily
Maintenance
Note: 1.When replacing or cleaning the machine,should
draw out the plug. 2.The part of mainframe can’t clean with
water directly.
1.Cleanout of admission grid: The machine
works for a period of time, the façade of admission grid
and pre-filter screen will absorb mass dust and need cleanout.
Can adopt daily scour to clean and after being dry it can
be installed in the machine. Suggested time: 2~3months.
2. Maintenance of coarse filter cotton and
alveolar activated carbon: After being worded for a period
of time, the surface of coarse filter cotton will absorbed
mass dust and need replace or cleanout. In addition alveolar
activated carbon will absorb mass odor and reduce active.
In order to reach better purifying effect, it also need dismantle
to replace. Suggested time: 4~5months.
3. Replace HEPA filter: Due to absorbing filth,
such as dust on the surface of HEPA after being used for a
period of time, for example: dedust effect of the filter obviously
reduces and it need replace. Suggested time: 1~2year.
4. Replacement of modulating tube: Modulating
tube has certain lifespan. After being used for a long time
or suffered damage which caused by people, need to replace
the modulating tube.
Note: The above suggestions are just for reference. Customers
can adjust specific maintenance time period according
to actual using circumstance. If you purchase above various
filter cartridges, please
kindly contact our company.
Precautions
1. Not specialty or unauthorized repairing
person can’t repair or change the machine by oneself.
2. Strictly prohibit wet hand carrying out
dismantle work.
3. Do not cleanout, maintain or move when
the power is on.
4. When the power supply line is damaged,
aging, knotting and damage of the connection joint, should
stop use.
5. Avoid of direct sunlight. When not use
for a long time should draw out plug. When pulling out and
inserting don’t pull the electrical line.
6. The machine can’t inhale flammable or
causticity gases.
7. Please do not close the humidifier or use
the machine in bathroom and kitchen.
8. Once the machine presents abnormal wind,
which shows every filter piece has much dust and will cause
reduce the capability of purifying. Please according to actual
situation cleanout or replace corresponding filter component.
9. Do not put heavy object above the machine.
10. Purifier should be mount stably. Keep
the passing in and out mouth of draught smooth.
11.Don’t let children play the machine avoiding
of happening accidents.
Common
Trouble Shooting
| Trouble phenomena |
Check items |
| Power supply indicator light does not light |
Whether the power supply is on |
| Whether connecting plug looses or open circuit |
| Whether admission grid installs well |
| Reducing of coming out draught volume |
Pre-filter screen and coarse filter cotton are polluted,
if that, please cleanout or replace. |
| Remote control does not work |
Whether battery is enclosed |
| Whether remote control is aiming at the purifier |
| Whether there is barrier between remote control and
the purifier |
| Whether battery is lack of electrical power, if that,
please replace new battery |
| Purifying effect is not better |
There is barrier around, and passing in and out air
is not smooth. |
Technical
Parameter
| Power supply |
Power |
Purifying efficiency(Can absorb particulate) |
| AC220V 50HZ |
<50W |
>= 95% |
| Amount of negative oxyen ions |
Max air output |
Noise |
| 3×106pc/cm3 |
120m3/h |
<35dB |
| Outside Size |
Weight |
|
| 47×26×34 |
6kg |
|
Application: inside within 30m2~50m2
Repair
Guarantee Byelaw
1. After buy the product, please fill in
the repair guarantee card carefully.
2. The repair guarantee time is 12 months.
(From the day buying the product)
3. The card is started to use from the first
repair guarantee. Please keep it and take with it as repairing.
4. Any case as follows is not in the repair
guarantee, but we also offer repair service:
(1) User causes the damage for take-down or
repair privately.
(2) Cause the damage for operating and keeping
not in term of the operating specification.
(3) Cause the damage for natural disaster,
electricity grid malfunction and transportation privately.
(4) The serial number is altered.
(5) The using time is over the repair guarantee
time.
5. We offer zealous service for the product
over repair guarantee time, but charge in terms of regulation.
6. The repair guarantee service is not including
the transport fee and traffic fee.
Repair
Guarantee Card
Product Repair Guarantee Card
| User Name |
|
Address |
|
TEL |
|
| Buying Date |
|
Model |
|
Seller |
|
| Repair Guarantee term |
|
Serial Number |
|
Remark |
|
Malfunction Repair Note
| Repair Date |
Repair Content |
Maintenance Man |
User signature |
| |
|
|
|
| |
|
|
|
| |
|
|
|
| 
